manualshive.com logo in svg

SharkRF openSPOT, Руководство пользователя

Поделиться
Скачать
SharkRF openSPOT Скачать руководство пользователя страница 130

DMR transceiver

129

Upgrade downloads are slow

Downloading upgrades is a low priority task so it won't interfere with normal
operation and also the device won't consume much power during the download.

The device does not turn on

If pressing and holding the power button for 1-2 seconds does not turn on the
device, then press and hold the power button for at least 7 seconds to do a
hard reboot.

If the status LED is blinking 3 times (and/or the power LED is blinking slowly),
and the device immediately turns off, then the battery is overheated, and its
protection is active. Avoid exposing the device to direct sunlight and wait a few
minutes so the battery can cool down.

If the power LED is blinking fast, then there's an error with the currently
connected charger. Try using a different USB charger, or a different USB port on
the computer.

If there is no LED activity at all, then the battery may be completely depleted.
Connect the openSPOT4 to a USB power supply and leave it for at least 30
minutes, then turn the device on with the power button. If it still does not
power on, hold the power button for at least 7 seconds to perform a hard
reboot.

If it still does not turn on, then use the openSPOT4 recovery application to flash
a complete firmware image to the device manually. This will also reset the
configuration of the device to factory defaults.

openSPOT4/v1 recovery app for Windows 10 and up
openSPOT4/v1 recovery app for Linux

DMR ID is not in the database warnings on the web
interface

A valid DMR ID is only required by the network/server you use. The openSPOT4
only displays a warning about that and does not care if your ID is valid or not.

Battery is charged to 100% and shows (ex.) 92%
when unplugged

The battery is still charging when it is showing 100%. Charge is completed
when the battery status on the web interface is "ready", and the power LED is
off. Make sure the device is plugged in until the charge is completely done. Note
that the battery charge percentage is only a rough estimate.

The device turns off even when it's connected to a
charger

Make sure you use a USB charger which can supply enough current for the
openSPOT4 while it's operating (min. 2000mA).

Содержание openSPOT











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды