SharkRF openSPOT, Руководство пользователя

Страница: 123 / 138

DMR transceiver
122
After you've chosen the Wi-Fi network and entered the password, the
openSPOT4 starts connecting to the selected network, and indicates the
result of the process on the web interface. If it has been connected, click
on the Next button on the Connected page. At that moment, your browser
device (phone/tablet/computer) will disconnect from the openSPOT4's Wi-
Fi AP network. What you have to do now is to connect to the exact same
Wi-Fi network with your browser device as you've configured for the
openSPOT4.
Make sure you have enabled 2.4GHz Wi-Fi, not just 5GHz.
Place the openSPOT4 close to the Wi-Fi router.
Make sure the Wi-Fi bandwith is set to max. 20Mhz in the Wi-Fi router
(see explanation
here ).
If it still does not work, try switching Wi-Fi channel on your Wi-Fi router.
Only channels 1, 6 or 11 should be used (see explanation
here ).
You can also find more information on the Connecting the openSPOT4 to a Wi-
Fi network page on the steps required to set up the openSPOT4's Wi-Fi
connection.
The status LED is white
White status LED means that the openSPOT4's built-in AP (access point) mode
is enabled.
In this mode, the openSPOT4 broadcasts its own Wi-Fi network called
openSPOT4 AP , indicated by white LED. You can connect to this network
using your browser device (phone/tablet/computer).
Make sure you place your browser device close to the openSPOT4 during
this time.
The initialization setup will pop up, where you can select a Wi-Fi network
for the openSPOT4 to connect to. If the initialization setup won't open
automatically, then you can open it by entering
http://192.168.99.1/ into the
web browser while your browser device is connected to the Wi-Fi network
openSPOT4 AP . Note that this address is only active while the
openSPOT4's AP mode is enabled, indicated by white status LED.
Make sure you've entered the Wi-Fi password case sensitive.
After you've chosen the Wi-Fi network and entered the password, the
openSPOT4 starts connecting to the selected network, and indicates the
result of the process on the web interface. If it has been connected, click
on the Next button on the Connected page. At that moment, your browser
device (phone/tablet/computer) will disconnect from the openSPOT4's Wi-
Fi AP network. What you have to do now is to connect to the exact same