SilentStorm SFX Bronze
13
5.4 Checking all connections
Ensure that all devices are properly connected, then connect the power supply cable with the power
supply and a power outlet. Turn the power supply on using the on/off switch located on back. This
completes the installation of the power supply.
Note:
All connectors are fault-preventing designed to avoid misconnection. If you are unable to connect the
male connector-to-female connector of the drive or peripheral, please check if both connectors are
attached in the correct orientation.
Do not force to plug the connectors within the incorrect orientation, nor modify any of the
components, as this will damage the power supply and other hardware. SHARKOON guarantee does
not cover damage cause by incorrect handling.
6. Troubleshooting
If the power supply does not work properly, check the following:
1. Is the power cable correctly connected to a wall outlet and the power supply’s power connector?
2. Ensure that the on/off switch is in the “I” position.
3. Check if the main power connector is correctly plugged to the mainboard.
4. Check if the power connectors are properly connected to the peripheral devices, in case the short
circuit protection function was activated when switching on the power supply.
5. Turn the power switch “off” and then back “on” several times, with a minimum cycle of 5 seconds.
6. If the power supply still does not start, please contact [email protected].
Power supply on/off switch