SilentStorm SFX Bronze
10
5. Installation
If installing into an empty PC case please continue to section 5.1. If a power supply has already been
installed, remove it first from the case. To do so proceed as follows:
1. Switch off your PC. Disconnect the power cable from the wall outlet and your power supply. Unplug
all cables connected to the PC case (e.g. keyboard, mouse, etc.).
2. Open the PC case (for additional information refer to the PC case’s manual).
3. Disconnect all cable connections between the power supply and other PC components
(e.g. mainboard, HDDs, drives, fans, etc.).
4. Remove the mounting screws connecting the power supply to the PC case and carefully remove the
power supply from the case.
5.1 Installing the power supply into the PC case
1. Insert the power supply into the PC case and place it against the power supply bracket.
2. Attach the power supply from the outside of the case using the provided screws. Ensure that the fan
and air vents of the built-in power supply are not covered.
3. If installing the power supply into an ATX case, please use the included mounting frame (see 3).
Attach the ATX mounting bracket to the power supply using the supplied screws. The SFX power
supply can then be screwed to the ATX case.
