7
sharkclean .co.uk
6
sharkclean .co.uk
ASSEMBLY
1.
Insert
Wand
into
Nozzle
.
2.
Insert
Handheld Vacuum
into wand.
For proper operation, ensure all components are
completely connected and clicked into place.
3.
Make sure the
Dock Plate
is facing upright. Slide
the
Charging Post
into the slot on the back of
the dock until it clicks into place.
4.
Place the dock on the floor near a power socket.
Plug the
Wall Charger
into the socket, then
connect the cord to the port on the back of the
charging post.
5.
Store Duster Crevice on the mount on the dock
plate.
LI-ION BATTERY
Prior to first use, charge the battery completely. A full charge takes approximately 3 hours.
Visit
Sharkclean.co.uk
online or review the included Quick Start Guide.
This product uses a Li-ion rechargeable and recyclable battery. When the battery no longer holds a charge,
it should be removed from the vacuum and recycled. DO NOT incinerate or compost the battery. When your
Lithium ION Power Pack Battery needs to be replaced, dispose of it or recycle it in accordance with local
regulations. In some areas, it is illegal to place spent lithium-ion batteries in the bin or in a municipal solid
waste stream. Return spent power packs to an authorised recycling center or to retailer for recycling.
Contact your local recycling center for information on where to drop off the spent power pack.
RECYCLING THE LI-ION BATTERY
LED BATTERY POWER AND CHARGING INDICATORS
NOTE:
A complete charge takes approximately 3 hours. The Li-ion battery will naturally decrease in capacity over time from
the 100% capacity of a new battery.
NOTE:
Your vacuum’s model and serial numbers can be
found on the QR code label on the bottom of the back of
the handheld vacuum.
NOTE:
Once the charging post is installed, it can’t be
removed.
RUNTIMES PER FULLY CHARGED BATTERY
Wand
Handheld
Vacuum
Floor
Nozzle
1.
2.
Accessory
Storage
Assembled
Dock
4.
5.
Charging
Post
Dock
Plate
Charger
3.
To order spare
batteries or
accessories visit
sharkclean.co.uk
Space for spare
battery located here
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE:
Full charge takes approximately 3 hours.
LEDs will shut off 10minutes after achieving full charge.
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
Boost
Mode
