WHAT’S INSIDE:
POWER SETTINGS
CHARGING
ASSEMBLY
A
B
C
2
(Click)
1
(Click)
OFF
HARD FLOOR
SETTING
CARPET SETTING
BOOST MODE
Slide switch to the
top to turn off power.
To begin vacuuming,
slide switch to the
appropriate setting.
Slide switch to the
middle. The brushrolls
spin slowly to clean
hard floors and low-pile
area rugs.
Slide switch to the
bottom. The brushrolls
spin faster to pick up
debris below the surface
of your carpets.
For an added boost in
power, pull the
Trigger
on the handheld vacuum.
Release it to return to
standard power.
LITHIUM-ION POWER PACK
NOTE:
The Lithium-Ion Power Pack battery
comes partially charged. Charge fully before
first use, then run the battery down until it is
completely out of power. This will condition the
battery so the LED indicators will work properly.
Battery Indicator Lights
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE:
Full charge takes approximately 3 hours.
F
E
G
H
I
D
A
Handheld Vacuum
B
MultiFLEX® Wand
C
DuoClean® PowerFins Floor Nozzle
D
Crevice Tool
E
Pet Multi-Tool
F
Anti-Allergen Brush
G
Lithium-Ion Battery (Pre-Installed)
H
Charger
I
HEPA Post-Motor Filter (Pre-Installed)
OUT OF THE VACUUM
IN THE VACUUM: MULTIFLEX® WAND
For additional parts and accessories, visit
sharkclean.com
To put the vacuum in storage mode, press the
MultiFLEX
Lock Release
button while folding the handheld vacuum
forward until the wand clicks and locks. Plug the charger
into the charging port on the battery.
To remove the battery, press the
Battery Release
button and slide out the battery. Plug the charger
into the charging port on the battery.
