Shark V2950A, Руководство пользователя

Страница: 8 / 12

8 TOLL FREE: 1-800-798-7398
3 To re-insert the dust cup,
position it over the floor and
carpet sweeper base and press
down gently until it snaps into
place. (
fig. 12 )
For easy insertion into the
base, tip the dust cup slightly
forward.
IMPORTANT:
Although many
adapters look similar, it’s
important to use only the
adapter that came with your
floor and carpet sweeper
(XA2950).
OFF
1 Always make sure that the unit
is turned off. ( fig. 7 )
2 Insert the charger plug into the
hole on the back of the floor
and carpet sweeper base.
(
fig. 8 ) Plug the charger into a
wall outlet. The light next to the
On/Off button will illuminate
when the unit is charging. If
the unit is plugged in and the
light is not illuminated, press
the On/Off button once. The
light should now be illuminated
indicating that the unit is
charging. (
fig. 9
)
Fig. 7
Fig. 8
1 Press the dust cup release
pedal on the floor and carpet
sweeper base to remove the
No-Touch dust cup. (
fig. 10 )
Fig. 10
Fig. 11
Fig. 12
CHARGING YOUR CORDLESS FLOOR AND CARPET SWEEPER
EMPTYING THE DUST CUP
3
Let the battery recharge for 7
hours. Your cordless floor and
carpet sweeper is powered by
Ni-MH batteries that need this
time to build up their charge.
4
Always remove the charging
adapter from the unit after the
charging period has completed.
Storing the unit with the adapter
attached and plugged in will
reduce battery life.
2
Hold the dust cup over a trash
can and push the bottom-empty
button located on the lower
portion of the handle. The
trap door will spring open and
release the debris into the trash
can. (
fig. 11
)
Fig. 9