Shark V2950A, Руководство пользователя

Страница: 3 / 12

3 www.sharkclean.com
TO MAXIMIZE THE LIFE OF YOUR
NI-MH BATTERIES:
1 Charge for 7 hours before initial use. Failure
to do so will reduce the product’s battery life
significantly.
2
Always remove the charging adapter fom the unit
after the charging period has completed.
3
Do not store the unit with the charging adapter
attached and plugged in.
4 For maximum battery life, only recharge the unit
when the batteries are close to fully discharged. It
is best to fully discharge the batteries at least once
a month.
5 DO NOT
store in areas of high temperature or
humidity.
6
After 3 months of non-use, the product should be
fully discharged and then recharged to maximize
battery power.
7 Ni-MH batteries have a long useful life but at some
time they will need to be replaced. To purchase
replacement batteries, visit www.sharkclean.com.
NOTE:
The On/Off switch must be in the “Off”
position in order to charge the unit. If the charging
indicator does not light, press the On/Off button
once.
SAVE THESE INSTRUCTIONS
Warning:
Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.