background image

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Assembly 

Note: Dust cup filter must always be 

used when operating the hand 

vacuum.

1. To open the dust cup compartment, 

push the dust cup release button 

and  remove the dust cup 

container. (Fig. 2)

2. Verify that the dust cup filter is 

inside, then re-attach the dust cup 

container to the hand vacuum. 

(Fig. 3)

Before Use

1. This cordless vacuum is powered by 

rechargeable nickel-cadmium 

batteries. Before using the vacuum, 

charge the vacuum cleaner for a 

minimum of 20 hours.

NOTE: Ensure that the On/Off 

switch is in the “Off” position 

before charging.

TROUBLESHOOTI NG GUI DE

PROBLEM

POSSIBLE REASON

POSSIBLE SOLUTION

HAND VACUUM
WILL NOT
OPERATE

1. Batteries discharged.
2. Dead battery (battery

won't hold charge).

3. Contacts between the

unit and the charging
stand are dirty.

4.  No power in electrical

outlet supplying
transformer.

1. Charge unit.
2.  Replace batteries. (See

page 5.)

3.  Wipe and clean dirt from

contacts.

4.  Check fuse or breaker.

Replace fuse/reset
breaker.

MOTORIZED
BRUSH WILL NOT
WORK

1.  The 2 metal pins of

the motorized brush
are not in contact
with the vacuum
cleaner.

2.  Motorized brush is

clogged up.

1.  Firmly insert the

motorized brush into the
air-intake nozzle. This
will connect the
motorized nozzle to the
unit power supply.

2.  Remove all lint, hair etc.

from motorized brush.

HAND VACUUM
WILL NOT PICK-
UP OR SUCTION
POWER IS WEAK

1.  Dust cup container is

full.

2.  Dust cup filter needs

cleaning or
replacement.

3. Unit needs

recharging.

1. Empty dust cup

container

2.  Remove dust cup filter

and check for object(s)
in air duct and remove.
Clean or replace dust
cup filter.

3. Charge unit.

DUST ESCAPING
FROM HAND
VACUUM

1.  Dust cup container is

full.

2.  Dust cup filter is not

installed correctly.

3. Puncture/hole in dust

cup filter.

1. Empty dust cup

container.

2.  Review dust cup filter

installation instructions.

3.  Replace dust cup filter.

NOTE:

Peak performance may only 

be realized after the unit has been 

charged and discharged two (2) or 

three (3) times.

Fig. 2

Fig. 3

IMPORTANT:

To maintain peak 

performance of your cordless hand 

vacuum, it is recommended that the 

unit be fully discharged, then 

completely re-charged at least once a 

month.

Charging Your Vacuum Cleaner

1. Place the charging base

near an electrical power 

outlet (120 V., 60 Hz.) 

and plug in the chaging 

adapter's jack into the 

charging base.

2. Plug the charger into wall

outlet.

3. Place the unit in the 

charging base. The 

charging indicator light 

will shine green to 

indicate that the vacuum 

cleaner is properly 

positioned in the 

charging base and that 

the unit is being charged. (See fig. 1)

NOTE: Ensure that the On/Off 

switch is in the "Off" position 

before charging.

4. Always return the unit to the charging 

base immediately after use so that it 

will be ready and fully charged for it's 

next use.

2. Store the vacuum cleaner in the 

charging base when not in use so that 

it is always charged and ready  to 

use.

Fig. 1

3.  To attach the crevice tool or the 

dusting brush to the hand vacuum, 

push the attachment into the 

suction hole in the front of the 

dust container. (Fig. 4)

Fig. 4

3

6

Содержание SV726







Отзывы: