6
TOLL FREE:
1-800-798-7398
CARE AND MAINTENANCE
EMPTYING THE DUST CUP
To maintain the best performance of
your vacuum, empty the dust cup after
every use or as debris approaches the
“MAX FILL” line. Never operate the
vacuum without the dust cup and filter
in place.
1
Turn off the vacuum before
removing the dust cup.
2
Press down on the dust cup
release button (
fig. 5
) and pull out
the dust cup.
3
Holding the carry handle, place
the dust cup inside a trash
receptacle and press the lower
dust cup door release button.
Gently tap the dust cup to
dislodge and release dust and
debris. (
fig. 6
)
Important:
If the Dust Cup Door
does not swing open after press-
ing the release button, push the
door open using the bottom door
tabs.
4
Snap the door back in place.
5
If you notice hair or other debris
wrapped around the metal screen
in the upper chamber of the
dust cup, press the upper dust
cup door release to open the
top of the dust cup. Lift out the
metal screen, clear any debris and
replace. Snap the door back into
place. (
fig. 7
)
6
Replace the dust cup by first
seating the lower part of the dust
cup, then pushing in the top part
until it clicks. (
fig. 8
)
CAUTION: Remove the unit from
the charging stand before any
servicing.
fig. 5
fig. 6
fig. 8
fig. 7
!""##$%&'$""#(#)$*+,-..///1
""0#(0#1///)231/45
