Shark STRATOS CLEAN SENSE IQ MultiFLEX IZ800 Series, Руководство пользователя

Страница: 3 / 13

sharkclean.com sharkclean .com
ASSEMBLY
1.
Insert
Wand
into
Floor Nozzle
.
2. Insert Handheld Vacuum into wand.
3.
Remove
Odor Neutralizer Technology Dial
from bag. Flip up the dial handle, align the teal
arrows, then insert the dial into the nozzle.
For proper operation, ensure all components are completely connected and clicked into place.
LI-ION BATTERY
The Lithium-Ion Power Pack battery does not come fully charged. Prior to first use, charge
completely. During first use, run the battery down until it is completely out of power. This will
condition the battery.
This product uses a lithium-ion rechargeable and recyclable battery. When the battery no longer
holds a charge, it should be removed from the vacuum and recycled.
DO NOT
incinerate or
compost the battery. When your Lithium-Ion Power Pack Battery needs to be replaced, dispose
of it or recycle it in accordance with local regulations. In some areas, it is illegal to place spent
lithium-ion batteries in the bin or in a municipal solid waste stream. Return spent power packs to
an authorized recycling center or to retailer for recycling. Contact your local recycling center for
information on where to drop off the spent power pack.
Additional Notes
1. LEDs turn off once the battery is fully charged.
2. Unit will not power on when charger is connected.
ABOUT YOUR ION POWER PACK BATTERY
LED BATTERY POWER AND CHARGING INDICATORS
1.
2.
MultiFLEX®
Wand
Handheld Vacuum with
Removable Battery
IZ840/IZ860 Series
(Click)
(Click)
DuoClean® PowerFins™
Floor Nozzle
Battery Runtime
MODE
MINUTES
IZ840H
IZ862H
Hand Vac – ECO Mode
60
Boost Mode (Hand Vac) 10
SUCTION POWER MODES
ECO Mode
Maximum runtime. Saves
battery power.
Clean Sense IQ Mode
Best balance between suction
power and optimized runtime. Best
used on carpet AND hard floor.
Boost Mode
Maximum suction. Uses the most
battery power.
Clean Sense IQ runtime depends on
individual use and amount of debris on
cleaning surfaces.
Suction mode impacts runtime. Use Boost in
short bursts.
3.
Charging
LED will pulse white when reaching 100% charge.
LED will pulse green from 76% - 99% charge.
LED will pulse yellow from 0 - 75% charge.
No LED the battery pack is off
NOTE:
Full charge takes approximately 3.5 hours.
SUCTION MODE DISPLAY LIGHTS