OPERATING INSTRUCTIONS cont.
OPERATING INSTRUCTIONS cont.
Important:
Please note that bristles may
break through thin towels. We recommend
that two (2) towels, laid one on top of the
other be used. This will ensure that the
brush bristles do not break through and
that the towels will be sufficiently absorbent
and retain as much dirt as possible.
Very Important
:
When installing the
towels to the floor brush, ensure that the
towels do not cover the front and the back
of the brush. (See fig. E)
Attaching a Towel to the
Floor Brush
100% white terry cloth towel can be fitted
on this brush, so as to absorb the dirt and
protect delicate surfaces.
Fig. C
Fig. B
1. Prepare white terry cloth towel:
size 8” x 17” as shown in Fig. A.
2. Place the brush on top of the towel.
5. Place the corner under the cloth
holder as shown in Fig. D.
Fig. D
6. Place the towel around the brush,
and repeat folding the towel as shown
in Fig. E. When folding the towel,
leave some slack.
Do not
pull tightly
around the brush, leave some
looseness.
Open
Open
Fig. E
Fig. A
Concentrator Nozzle
This attachment is very useful for
cleaning surfaces that are difficult to
reach. It is ideal for radiators, door and
window jambs, shutters and
sanitary fixtures. The
concentrator nozzle will
fit directly onto the
pistol grip or may be
used with extension tubes
Dual Edge Glass & Tile Squeegee
This attachment is very useful for
cleaning large windows, plastic material,
ceramic, tiled or marble surfaces.
To use: Connect the tile
squeegee to the pistol
grip or use with
extension tube for
hard to reach surfaces.
Apply steam abundantly, rub with the
soft spongy edge, then remove excess
water and dirt with the glass wiping
edge.
To use: Push the detail
brush on the end of the
concentrator nozzle, which may be used
directly on the pistol grip or with extension
tubes
CAUTION
:
When cleaning windows,
always avoid any sudden changes in
temperature to prevent glass breakage
or cracks.
Detail Brush
It is best for cleaning grout in-between
the tiles, ceramic and marble.
Tips On How To Use Your
System
Water
•
Use tap water for all your cleaning
needs.
•
However, if you live in an area with
hard water, use demineralized /
distilled water when steaming light
colored fabrics to eliminate the
possibility of hard water stains.
IMPORTANT:
Do
NOT
add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in
this appliance.
Use tap water or
distilled/purified water if the tap
water in your area is very hard.
Temperature
• The vapor temperature at the tip of
the nozzles is between 220°F and
240 °F.
• The temperature of the vapor falls to
100 °F at a distance of 10 inches
from the nozzle.
WARNING
:
A towel wrapped around
the brush can become hot enough to
burn. Make sure that you let the towel
cool off before touching it.
Efficient Work
• For vertical surfaces, wipe always
from the top down, in this way the
dirty water will not soil surfaces
already cleaned.
•
Avoid changing brushes back and
forth while cleaning.
•
Start with the smallest brush to
clean tight spots and corners first.
• Wipe dirt as soon as possible,
otherwise it will dry and re-adhere
to the surface.
Note
:
We strongly recommend the
use of two (2) 100 % cotton towels
layered one on top of the other.
• For best results use 100% cotton white
terry cloth towels.
• Use correct size (8” x 17”) of towel to
allow you to wrap the towel over the
ends of the brush and clip it under the
spring loaded towel clips.
• The purpose of using towels is to
absorb the moisture and dirt being
removed. Always use dry towels. A
wet towel will smear the dirt.
• Wash towels with strong detergent
and bleach.
• Using scented fabric softener while
washing the towels will cause the
scent to be released into the air
when using the towels with your
steam system.
Using Towels
Attaching the Accessories
to the Flexible Steam Hose
4. Fold the other side of the towel as
shown in Fig. C.
3. Fold the towel as shown in Fig. B
7
6
