6
7
www.sharkclean.eu
0800 862 0453
Using Your Sonic Duo
™
Carpet, Wood & Hard Floor Cleaner - cont.
10
Using the same back and forth motion, continue
to go over the same area without spray. For
heavily soiled high traffic areas or dingier carpets
you may need to go over the area for several
minutes, spraying periodically. Spray more
solution as needed while cleaning. Repeat as
necessary until the entire carpeted area has been
cleaned. No rinsing is required.
11
If the Reusable Bottle is empty, you can refill
it at any time as long as the
Sonic Duo
™
is
unplugged from the outlet.
12
Once finished, step on the tag of the
Carpet
Scrub‘n Stain
™
Pad and lift the unit to remove
the
Carpet Scrub‘n Stain
™
Pad from the
Sonic Duo
™
(
Fig. 21
). Let the carpet dry
thoroughly and then vacuum.
SPOT & STAIN CLEANING
Please note that not all carpets react to the
Sonic
Duo
™
the same way. Some carpets will require
more time and cleaning solution than others.
Step 1:
1.
Vacuum the stained or discoloured area to
remove any loose dirt, dust, or debris that may
have accumulated in your carpet.
Step 2:
2.
Begin by pretreating the stain with the
Activating Pretreater Carpet Stain & Odour
Remover until the stain or discolouration is fully
saturated.
3.
Let sit for 5-10 minutes.
4.
Use a white cloth with a blunt object to blot up
the stain.
5.
You will see the stain begin to transfer from the
carpet onto the white cloth.
6.
Continue to use fresh areas of the white cloth as
you blot up more and more of the stain.
7.
Never rub.
8.
Repeat as necessary.
6
Screw the bottle cap on tightly and insert the
Reusable Bottle into the unit. Push it down to
make sure that it is well inserted. You will hear
an audible “Click” when the Reusable Bottle is
inserted properly. (
Fig. 17
)
7
Twist the quick cord release holder to unwrap
the power cord completely. (
Fig. 18
) Plug into
an electrical outlet and slide the “ON/OFF”
button to turn the
Sonic Duo
™
on. Select the
faster Carpet Mode (II). (
Fig. 19
)
8
Lightly step on the back of the scrubbing head to
release the handle.
WARNING
: Never stand on the
Sonic Duo
™
.
9
Begin cleaning by pressing the Spray Button to
apply the cleaning solution to the carpet that
is to be cleaned. (
Fig. 20
) Spray the solution
continuously while pushing the unit forward and
then pulling it backward several times until the
area to be cleaned is damp.
NOTE
: The first time that you use the
Sonic
Duo
™
there may be air in the system causing a
delay for the solution to come out of the spray
nozzle. Hold the spray button down for 5 to 10
seconds until you see the solution spray out.
Frequently Asked Questions
Q.
I noticed a rippling effect on the edges of my area
rugs – should I be concerned?
A.
Wool area rugs sometimes have a rippling
effect on the edges after cleaning. This
rippling will relax our after a few days of
regular wear and usage.
Q.
After using the Low Moisture –No Rinse- Carpet
Cleaner, my carpet feels dry and crunchy – what
can I do?
A.
If your carpets feel crunchy, you likely used
too much of the Low Moisture – No Rinse-
Carpet Cleaner. The dry crunchy feeling will
go away after a few days of normal wear
and usage. Another pass vacuuming should
also help break up the crunchy texture more
quickly. To avoid this from happening again,
we recommend using less solution on one
specific area or a less concentrated dilution.
Q.
How can I remove tough stains?
A.
Begin by treating the stain with the Activating
Pretreater until fully saturated. Let sit for 5-10
minutes. Next, use a white cloth with a blunt
object to blot up the stain. You will see the
stain transfer from the carpet onto the white
cloth. Continue to use fresh areas of the cloth
as you blot up more and more of the stain.
Never rub. Repeat as necessary.
fig. 17
fig. 18
fig. 19
fig. 20
fig. 21
