6
www.sharkclean.co.uk
Using Your Portable Steam
Cleaner with Flat Scrubber
Cleaning Tip: The Flat Scrubber is designed
for cleaning a variety of surfaces and is
exceptional on those that are large and
flat including counter tops, table tops,
walls mirrors, windows, stairs, shelves and
other similar surfaces. Super absorbent
bonnet loosens, lifts, and locks in dirt and
grime while sanitising at the same time.
fig. 6
fig. 7
1
To attach the All-Purpose Scrubber Pad, place
the pad exterior side down on a flat surface
(lavender tab indicates the bottom of the pad)
and insert the top of the Flat Scrubber Tool into
the top portion of the pad and then pull the pad
over each side of the back edge.
2
Press the Flat Scrubber Tool onto the Accessory
Hose until it clicks into place. (
fig. 6
)
3
Hold down the steam trigger to start steaming.
(
fig. 7
)
4
To remove the Flat Scrubber Tool, press and hold
down the Accessory Hose release button. Then
slide out the Flat Scrubber Tool. (
fig. 8
)
CAUTION:
Do not press the steam trigger
while attaching or removing the Flat Scrubber
Tool.
CAUTION:
Do not use the Flat Scrubber Tool
without the All-Purpose Scrubber Pad attached.
Using Your Portable Steam
Cleaner with Dusting Brush
Cleaning Tip: Detail Brush is designed for
removing stubborn messes in hard-to-
reach nooks, corners and in grout where
focused scrubbing power may be needed.
The Detail Brush can loosen and dislodge
compact dirt often found in corners and
tight places where traditional methods
and cleaning tools tend to push dirt into,
making it difficult to reach and clean.
Scrub with the Detail Brush and wipe clean
with a cleaning cloth.
1
Attach the Detail Brush by snapping into the
handle of the Accessory Hose. (
fig. 9
)
2
Hold down the steam trigger to start steaming.
(
fig. 10
)
3
To remove the Detail Brush, press and hold down
the Accessory release button. Then slide out the
Detail Brush.
CAUTION:
Do not press the steam trigger
while attaching or removing the Detail Brush.
fig. 9
fig. 10
fig. 8
SC660UKJR_11_IB_ENG_120523_1.indd 6
12-05-23 1:46 PM
