5
www.sharkclean.co.uk
GENERATING STEAM
1
Plug the unit in and wait about 30 to 45 seconds
then press and hold the steam trigger to activate
the pump. You will immediately hear steam
generating and begin to see visible results either
from the nozzle or the attached cleaning tool.
It is recommended that you wait at least 30
seconds before pulling the trigger as this will
minimise water spitting. (
fig. 5
)
2
Once you release the steam trigger, the pump
will stop delivering water to the boiler and the
steam will reduce to a stop when the boiler
becomes empty.
CAUTION:
Steam is hot and can cause burns,
so please use with caution.
WARNING:
Your portable steam cleaner is
designed to clean surfaces that will withstand
high heat and moisture. Do not use on unsealed
wood surfaces (especially wooden antique
furniture), unglazed ceramic tile, or surfaces that
have been treated with wax, oils, varnishes,
or shellac. The sheen may be removed by the
heat, steam, and friction of the cleaning tools.
Lacquer and polyurethane coatings provide a
hard durable protective finish that withstands
moisture but it is always recommended to test
an isolated area of the surface to be cleaned
before proceeding.
We also recommend you check the use and care
instructions from the surface manufacturer.
IMPORTANT:
Once plugged in, the Blue LED
will illuminate, and your portable steam cleaner
cleaning system will be ready to use within
30-45 seconds. (
fig. 4
)
NOTE:
Make sure surfaces are free of crumbs
and debris before using the portable steam
cleaner.
fig. 4
fig. 5
SC660UKJR_11_IB_ENG_120523_1.indd 5
12-05-23 1:46 PM
