6
TOLL FREE: 1-800-798-7398
7
www.sharkclean.com
Using Your Steam Pocket
®
Mop
IMPORTANT
: Do not use the mop
without attaching a micro-fiber
pocket and adding water to the tank
first. When you are using the mop
for the first time, it might take longer
than the normal 30 seconds to start
steaming. Just pump the handle a
few times in a downward motion to
prime the pump.
2
Pump the handle a few times in a
downward motion. This pumping
action will release steam as you
mop and allows you to customize
the amount of steam you want.
Begin mopping with a forward
and backward motion. The natural
motion of mopping will produce
steam.
NOTE
: Make sure the floors are
swept or vacuumed before using the
Steam Pocket
®
Mop.
1
Pull and twist the quick release cord
holder to unwrap the power cord
completely.
Plug into a 120-volt electrical outlet
The power “On” light will turn blue, it
takes approximately 30 seconds for
the mop to heat up and the steam to
be ready.
2
1
3
When one side of the micro-fiber
pocket gets dirty, just flip the mop
head and you can quickly start using
the other side.
IMPORTANT
: Please wait 3-5 minutes
for the
Steam Pocket
®
Mop to cool
before switching the mop head or
the micro-fiber
Steam Pocket
®
.
4
When the water tank is empty,
the
Steam Pocket
®
Mop will stop
producing steam. You can refill the
water tank at any time as long as the
mop is unplugged from the outlet.
Follow the instructions from
page 4.
IMPORTANT:
Never leave the
Steam Pocket
®
Mop with a damp/
wet micro-fiber pocket on any floor
surface for any amount of time as
this may damage the floor.
3
