Shark Rotator NV680ANZ, Руководство пользователя

Страница: 5 / 9

7 8 N Z : 0 8 0 0 0 0 2 9 9 9 A U S T: 18 0 0 8 9 0 8 4 0
RECOMMENDED FILTER CLEANING SCHEDULE:
Pre-motor Filter Kit (Foam & Felt):
XFF680
Every 3 months
Post Motor Filter:
XHF680
Every year
1 Press LIFT-AWAY button to lift the pod off the floor
nozzle�
Insert the WAND into the motorized floor nozzle�
TIP Using the vacuum in Powered Lift-Away mode gives you
extended reach for cleaning under furniture and in tight
spaces�
2 Insert the HANDLE into the motorized floor nozzle�
TIP Attaching the HANDLE directly into the nozzles makes
cleaning stairs easy�
1 Attach the desired accessory directly into the HANDLE�
TIP For an extended reach, attach the desired accessory into
the WAND�
POWERED LIFT-AWAY ™ CLEANING LIFT-AWAY ™ CLEANING
EMPTY THE DUST CUP
1
Pull up on the dust cup release latch and lift the dust cup
off the pod�
2 Holding the dust cup over a garbage bag or can, press the
bottom empty release latch�
3 Press the top dust cup release latch to access the dust
screen and remove built-up debris as required�
CLEAN THE FILTERS
1 With the dust cup removed, remove and rinse the foam
and felt filters every 3 months� Let air dry completely
before replacing� Hand wash only� Tap loose dirt off
filters between washes as needed�
2 Once a year open the filter grill and remove and
rinse the HEPA filter� Let air dry completely before
replacing� Hand wash only�
WARNING: DO NOT PICK UP FIREPLACE ASH
OR DRYWALL DUST.
MAINTENANCE
To keep your vacuum’s suction power optimal, follow these instructions.
Make sure unit is off and cord unplugged.
IMPORTANT: Allow ALL filters to dry completely before replacing into the vacuum.
STEP 1 STEP 2 STEP 3
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
STEP 1 STEP 2
Extension Wand