sharkclean .com
sharkclean .com
MAINTENANCE
CHECKING FOR BLOCKAGES
Detach wand from pod and handle, and check both
ends for blockages.
Detach dust cup from vacuum pod. Empty dust
cup and remove debris from lint screen in the top
of the dust cup.
Detach handle from wand and check openings for
blockages.
Detach hose from handle by pressing on the
release button at the top of the hose. Detach
the hose from the pod, and check openings
for blockages.
DUST CUP BLOCKAGES
WAND BLOCKAGES
HANDLE BLOCKAGES
HOSE BLOCKAGES
Slide the Soft Roller access button forward to
release the Soft Roller.
Hand wash the Soft Roller as needed. Use only
water, and allow it to air-dry completely for at
least 24 hours. Reinsert the Soft Roller in the
front of the nozzle until it clicks into place.
CLEANING THE SOFT ROLLER
SELF-CLEANING BRUSHROLL
If any hair is wrapped around the brushroll, continue vacuuming, using Carpet/Low Pile mode
on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning
brushroll to remove the hair wrap and send it to the dust cup.
If you run over a hard or sharp object or notice a noise change while vacuuming, check for
blockages or objects caught in the brushroll.
If some fibers remain wrapped around the brushroll after continued use, carefully remove them.
NOZZLE MAINTENANCE
