sharkclean .com
sharkclean .com
EMPTYING THE DUST CUP
To remove the
Dust Cup
, slide up on the release
button located on the side of dust cup handle.
Tilt dust cup forward, then lift to remove.
To reinstall, place the bottom of the dust cup
onto the pod and then tilt until it clicks into
place.
To empty debris into the trash, press the lower
release button and the bottom of the dust cup
will drop open.
Clear debris from the
Lint Screen
in the dust
cup. Lift the upper release tab at the top of
the dust cup and open the lid. Gently brush
the lint screen to remove debris.
RINSE HEPA FILTER
EVERY YEAR
To remove the
HEPA Filter
, first pull the tab
on the bottom of the filter door, then lift off
the door. Press the tab on the side of the
HEPA filter and pull out the filter.
To reinstall the door, align the top first, then
press in the bottom until it clicks into place.
RINSE PRE-MOTOR FILTERS
EVERY MONTH
Remove the
Dust Cup
, then lift out
Filters
.
Regularly rinse the filters to maintain your vacuum's suction power.
Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before
reinstalling them to prevent liquid from being drawn into electronic parts.
CLEANING THE FILTERS
IMPORTANT:
DO NOT
use soap when cleaning the filters.
IMPORTANT:
Unplug the power cord before performing any maintenance.
Post-Motor
HEPA Filter
Foam
Felt
Filter
Door
