15
16
1-800-798-7398
sharkclean .com
ENGLISH
CAUTION: Hand
wash filters with
water only to prevent
damage from cleaning
chemicals� Allow
ALL filters to air-dry
completely before
reinstalling them to
prevent liquid from
being drawn into
electric parts�
CAUTION: Turn power
off and unplug before
servicing�
IMPORTANT:
Clean the
dust screen inside the
dust cup as required�
NOTE:
Empty dust cup
when debris reaches
the MAX fill line�
MAINTAINING YOUR VACUUM
Empty
EMPTYING THE DUST CUP
1
Press the Wand Release button on the top of the
wand to disconnect it from the handheld vacuum�
OR
Remove the dust cup from the handheld vacuum
by squeezing the two Dust Cup Release buttons on
both sides of the base at the same time and pulling
it out�
CLEANING THE FILTERS
1
Access the pre-motor foam and felt
filters by lifting the latch on the top
of the handheld vacuum� Remove
and rinse the filters with water� Allow
filters to air-dry completely before
reinstalling� Tap loose dirt off filters
between washes as needed� Once
completely dry, insert the felt filter
first, then place the foam filter on
top of it�
2
Access the post-motor filter under
the handle� Remove and rinse the
filter with water� Allow filter to air-
dry completely before reinstalling�
2
Hold dust cup over a trash bin and
press the Empty button on the front
of the dust cup� The bottom lid will
open, allowing the debris to fall out�
3
Once dust cup is empty, close the
bottom lid and insert dust cup back
into handheld vacuum until you hear
it click into place�
Empty
Dust Cup
Release
Monthly
Post-Motor filter
Pre-Motor filters
Foam
Felt
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XPMFK320
Clean once a month�
Post-Motor Filter
1084FTV320
Clean once a year�
STEP 1
STEP 2
