17
2
1
VENTILATIONS
LOWER VENTILATION.
The principal function of this air intake
is to direct a flow of fresh air over the inte-
rior surface of the visor in order to limit the
risk of misting. The fresh air di
fused cuts off contact with the
hot air emitted by breathing
or even by the head inside the helmet.
To open (1) or close (2) the lower ventila-
tion, press the button as indicated.
TEXTILE PARTS - CLEANING
CLEANING THE INTERIOR
The interior textile parts are washable; it is im-
portant to follow the instructions below scru-
pulously to avoid damaging them:
The cheek pads and head section must be
hand washed in warm, soapy water (about
30°).
Do not use aggressive detergents but
either a product for delicate materials in
low dilution or household soap.
It is essential
to dry textile and foam parts completely before
using them. They must be dried at room tem-
perature. Never iron textile parts. For parts with
a leather appearance or textiles attached to
safety elements, use a slightly damp sponge or
cloth and household soap and rinse with clean
water.
Avoid allowing too much water to
come into contact with polystyrene parts.
WARNING!
It is essential to ensure that
all interior parts are perfectly dry before
using the helmet.
Manuel Ridill.indd 17
31/08/2016 15:41
