19
20
1-800-798-7398
sharkclean .com
CLEANING THE BRUSHROLL
1
Press down on the two buttons on the floor nozzle to pop
up the brushroll garage lid.
2
Remove any string, carpet fibers, or hair that may be
wrapped around the brushroll. To loosen debris, run
scissors along the groove in the brushroll.
MAINTENANCE - CONT�
CLEANING THE SOFT ROLLER
1
Slide the Soft Roller Access Button up to
remove the Soft Roller.
2
Use scissors to remove any string, carpet
fibers or hair that may be wrapped around
the Soft Roller. You can also tap loose
debris off the Soft Roller, or wipe it clean
with a dry towel. If you see any fibers or hair
buildup in the teeth behind the Soft Roller,
take a dry towel and wipe it away.
3
Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4
Reinsert the Soft Roller by sliding it into the
front of the nozzle until it clicks into place.
CHECKING THE NOZZLE FOR BLOCKAGES
1
Tilt neck of nozzle back to straighten the
airway, then remove any blockages from
nozzle.
WARNING:
Brush may
start unexpectedly.
Unplug before cleaning
or servicing.
TIP:
You can also check
for blockages in the hose
and tubes. Just remove
the floor nozzle, dust cup,
and hose, and shine a
flashlight in the openings.
