Shark NV500UKE, Руководство пользователя

Страница: 3 / 9

4 5
ASSEMBLY 1 Place the vacuum pod onto Power nozzle.
2 Slide wand into base of the pod.
3 Insert handle into the top of the wand.
4 Attach flex hose into base of the pod.
5 Insert the crevice tool and dusting brush into the accessory clips as shown.
6
Tuck the hose between the two accessory clips.
UPRIGHT
CLEANING
ABOVE FLOOR
CLEANING
1 Press POWER to clean bare floor surfaces, area rugs or areas above-floor. The brushroll will not spin in this mode.
2 Press POWER and BRUSHROLL to clean carpets. The brushroll indicator lights will illuminate GREEN. If there is a jam, the indicator light
on Power nozzle will illuminate RED. Refer to MAINTENANCE (P11) for instructions on removing blockages.
3 Place your left foot gently on the Power nozzle and tilt the handle back to start cleaning. Note: The brushroll will only spin once the
vacuum is reclined back.
4 To clean with hose, press the WAND or HANDLE release button (depending on the amount of reach required) then lift handle up.
5 Insert wand or handle directly into desired tool.
6 Pivot back to release tool from accessory clip.
POWER
Bare floor or wand cleaning
POWER +
BRUSHROLL
Carpet cleaning
CLICK
1
2
5 5
3
4
CLICK
CLICK
CLICK
6
1
2
3
4
4
5
6
OR
OR