background image

Foam

Felt

HEPA

10

11

EMPTY THE DUST CUP
1

 

 Pull up on the dust cup release latch and lift the dustcup off the pod.

2

 

 Holding the dust cup over a refuse bag or bin, press the bottom empty release latch.

3

 

 Press the top dust cup release latch to access the dust screen and remove built-up debris as required. With the dust screen removed, 

turn the dust cup over and empty the upper chamber by holding it by the recessed handle underneath the dust cup.

CLEAN THE FILTERS  

See cleaning schedule on page 2
4

 

 With the dust cup removed, remove and rinse the foam and felt filters every 3 months. Let air dry completely before replacing.  

Hand wash only. Tap loose dirt off filters between washes as needed. 

5

 

 Once a year open the filter grill and remove and rinse the HEPA filter. Let air dry completely before replacing. Hand wash only.

MAINTENANCE

XDF500

XHF500

SUCTION CONTROL
1

 

 This unit is equipped with a suction control collar to help with push and pull on high pile carpets, area rugs and to release suction when dusting delicate objects or 

drapery. Located at base of top handle, rotate the collar 90° to minimize suction. Be sure to close again for maximum suction.

POWER BUTTONS
2

 

 The POWER button turns on suction only. This is ideal for use on bare floors, delicate area rugs and for use with accessories.

3

 

 The BRUSHROLL button spins the floor brush, ideal for use on carpeted surfaces. Note: The floor brush will only spin once the vacuum is reclined back.

CORD HOOKS
4

 

 For quick cord access, rotate upper hook 180° and remove cord. Rotate it back for cord storage. 

HEADLIGHTS

5

 

  Designed to illuminate debris in dark areas, the headlights illuminate any time the power is on. The headlights are long-lasting and designed to last the life of the 

vacuum.

HEIGHT ADJUSTMENT
6

 

 This Power nozzle has been optimized to work on all types of carpets as well as bare floors so there is never any need to adjust heights for different surfaces.

FILTERS
7

 

 Remember to clean your filters regularly under normal use. Also, for optimal performance, tap clean filters between washes as needed.

HELPFUL TIPS

1

2

3

4

5

1

2

3

5

7

4

Содержание NV500UKE










Отзывы: