16
TOLL FREE: 1-800-798-7398
PART
PART NO.
1
Pre-Motor Filter Set
XFF350
2
Post-Motor Filter Set
XPF350
3
HEPA Filter (NV350E)
XHF350
4
Dusting Brush
112FFJ
& Crevice Tool
5
Turbo Brush
1117FC
(NV350, NV350A, NV350E & NV350T)
6
Turbo Brush
119FFJ
(NV350WM)
7
Bare Floor Nozzle
118FFJ
8
24” Crevice Tool
1124-FC
• Remove the dust cup and extension wand
and separate the detachable canister from the
motorized floor brush. Look in all 4 openings
for any blockages.
(Fig. 33)
Motorized Floor Brush
• Detach the hose on the motorized floor brush
at the top by squeezing the tabs together and
pulling out, and at the bottom by pulling out
the connector. Inspect inside the 3 holes.
(Fig. 34)
Bare Floor Nozzle
(models NV350, NV350A & NV350E only)
• Straighten out the neck and look inside the
tube at the top of the nozzle. Check for
blockages where the hose bends and in the
intake opening.
(Fig. 35)
Fig. 34
Fig. 35
Maintenance - cont’d
Ordering Parts
1
5
6
7
4
Fig. 33
8
2
3
NV350_26_NV350A_26_NV350E_26_NV350T_26_NV350WM_26_IM_ENG_SPA_100929.indd 16
10-09-29 11:47 AM
