4
TOLL FREE: 1-800-798-7398
5
www.sharkclean.com
English
8
TO CARRY THE VACUUM:
With the unit in the standing
position, lift by the Dust Cup
Handle (carry handle).
CAUTION:
When lifting or
carrying,
DO NOT
press Dust
Cup release button ( ).
Fig. 1
FIRST THING’S FIRST, YOU
NEED TO KNOW WHAT’S IN THE
BOX YOU JUST OPENED:
A
Handle
B
Extension Wand
C
Stretch Hose
D
Dust Cup
Getting Started
YOUR SHARK
®
NAVIGATOR
™
IS EASY TO ASSEMBLE:
1
Place your vacuum body upright
on a level surface.
2
Insert the hose connector into
the opening on the back of the
vacuum body. (
Fig. 1
)
NOTE
: Once the hose connector
has been inserted, it cannot be
removed.
3
Insert the handle with the
extension wand into the top of
the vacuum until secure.
(
Fig. 2
)
4
Insert the stretch hose into the
hose connector on the back of
the unit. Make sure that it snaps
in place. (
Fig. 3
)
5
Store your on-board tools onto
the accessory holder located
on the back of the unit. (
Fig. 4
)
NOTE:
The accessory holder is
removable. In order to remove
or attach the accessory holder,
you must remove the dust cup
first. To remove the accessory
holder, just hold the tab (
a
),
rotate left and pull out. To
replace, align the pins into
the hinges (
b
) on the vacuum.
Rotate it fully to secure. (
Fig. 5)
6
When storing your vacuum,
wind the power cord around
the two cord holders and secure
with cord clip. (
Fig. 6
)
7
There is a Quick Cord Release
on the top cord holder. Simply
turn to the left or right to
release the power cord. To store
the unit, the cord holder should
be in the upright position.
IMPORTANT:
For suction to
reach the power nozzle, the
extension wand and stretch
hose must be attached securely
on the vacuum body.
Assembly
Not all accessories are available
on all models.
Fig. 6
Fig. 2
Fig. 4
F
H
A
E
C
D
B
E
Hose Connector
F
Vacuum Body
G
Accessory Holder
H
Power Nozzle
Optional tools are available
for sale. To order additional
parts or accessories go to
www.sharkclean.com.
G
Fig. 3
Hose Connector
Fig. 5
b
a
