8
TOLL FREE:
1-800-798-7398
ASSEMBLING THE LIFT-AROUND
™
PORTABLE VAC
1
Insert the end of the flexible hose into the
connector on the front of the
Lift-Around™
Portable Vac. (
fig. 1
)
2
Insert the removable tool caddy onto the back
of the Portable Vac. (
fig. 2
) To remove the tool
caddy, hold the vacuum by the handle, pull out
slightly from the right side and then remove it from
the Portable Vac. (
fig. 3
)
3
Insert the crevice tool, dusting brush, upholstery
brush or power brush into the openings on the tool
caddy. (
fig. 3
)
4
Attach the shoulder strap onto the hooks on the
handle of the Portable Vac. (
fig. 4)
5
Empty Dust Cup after cleaning and periodically
during cleaning when it appears full. (See
“Maintenance” section for instructions.)
FOR ADDED COMFORT OR FOR AN EXTENDED
REACH
6
Attach the floor kit handle to the flexible hose.
Push it in until it is secure. (
fig. 6
)
7
Insert the telescopic tube into the end of the floor
kit handle. Push it in until it is secure. (
fig. 6
)
NOTE:
All accessories may be used with the
flexible hose, the floor kit handle or the telescopic
tube.
8
Attach the desired accessory to the end of the
flexible hose, floor kit handle or telescopic tube by
pushing it in until it is tightly secured. (
fig. 6)
9
While holding the Portable Vac by the handle,
press down on the power button to turn the
Portable Vac on and begin vacuuming. Press down
again to turn the vacuum off. (
fig. 5)
How to Use
Fig. 6
Fig. 1
Fig. 2
Fig. 4
Fig. 5
Power
Button
Align arrows to attach tool caddy
Pull out to remove tool caddy
Fig. 3
NP320W_40_IB_ENG_120409_4.indd 8
12-04-09 2:10 PM
