12
TOLL FREE:
1-800-798-7398
STORE YOUR VACUUM SAFELY
1
Store the dusting brush, upholstery brush, the
crevice tool or the power brush on the mounts on
the removable tool caddy. (
fig. 17
)
2
Wrap the flexible hose around the base of the
vacuum and hook the end of the flexible hose into
the hose dock. (
fig. 18
) To release the hose, press
the Hose Storage button.
3
Wrap the attached cord strap around the power
cord when storing.
4
Store your vacuum cleaner with the rest of the
accessories safely in a cool dry area where they
will not be a hazard, will not get damaged and will
not cause damage to anyone or anything.
NOTE:
Empty dust cup after cleaning and prior
to storing. (See “Maintenance” section for
instructions.)
Storing
Your
Shark
®
Lift-Around™
Portable Vac is
equipped with a protective Motor Thermostat. If the
motor should overheat, the thermostat shuts off the
power.
To reset the Motor Thermostat:
Press the Power Button to turn the vacuum off.
Unplug the vacuum.
Check for clogged hose or filter; unclog hose and
replace filter. Refer to
Checking for Blockages
.
Wait 45 minutes for vacuum to cool; then plug in the
vacuum.
Press the Power Button to restart the vacuum.
Note: If vacuum still does not start, contact Customer
Service at: 1-800-798-7398.
Resetting the Motor Thermostat
Ordering Replacement Parts
To order additional parts and accessories, go to
www.sharkclean.com
or call
1-800-798-7398
.
PART
PART NO.
Pre-Motor Filters
XFF318
HEPA Filter
XHF318
Telescopic Tube
1057FT
Upholstery Brush
1061FT
Crevice Tool
1062FT
Dusting Brush
1063FT
Power Brush
1064FT
Floor Kit Handle
XKH320
Straight Suction Nozzle
XSN320
Fig. 17
Fig. 18
NP320series_40_IB_ENG_120409_2.indd 12
12-04-09 2:08 PM
