sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
NOTE:
For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), set to
MAX
suction and use setting
II
,
Carpet
.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, step on floor nozzle
and tilt handle back.
Select surface setting:
O Power Off
I Hard Floor
For bare floors and small area rugs,
the brushroll will spin slowly.
II
Carpet
For carpets, the brushroll will spin
quickly to pick up stuck on debris.
The Suction Control slider located on the handle
allows you to adjust the suction depending on the
floor type.
MIN:
to reduce suction and increase
maneuverability on carpets.
MAX:
to increase suction on bare floors.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushroll is spinning and working as it should.
Solid Red:
There is a jam in the brushroll area. Turn your vacuum off, unplug from the wall and
remove any blockages in the nozzle.
Flashing Red:
The motorized floor nozzle is overheating. Turn your vacuum off and wait a
minimum of 45 minutes for it to cool down.
Press the
Wand Release
button to detach the
wand from the pod.
Press the
Handle Release
button to detach
the handle from the wand.
UPRIGHT
POWER/SURFACE SWITCH
SUCTION CONTROL
INDICATOR LIGHT
ABOVE-FLOOR—WAND
ABOVE-FLOOR—HANDLE
Handle
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
