sharkclean .com
sharkclean .com
EMPTYING THE DUST CUP
To remove
Dust Cup
, slide up the latch on top of
dust cup handle. Tilt dust cup forward, then
lift to remove.
To reinstall, place bottom of dust cup into
pod and then tilt back until it clicks into place.
Press lower release button to open bottom of
dust cup.
To remove collected debris from
Lint Screen
,
press top release button and lift handle to
open. Gently brush lint screen to clean.
CLEAN HEPA FILTER
EVERY YEAR
Press down top of
Filter Door
. Tilt
Filter
Door
and lift out. Press tab at top of
HEPA
Filter
and pull away from the base of the
vacuum. To reinstall, insert HEPA filter into
unit and replace the filter door.
CLEAN PRE-MOTOR FILTERS
EVERY 3 MONTHS
Remove
Dust Cup
, then lift out
Filters
.
Regularly clean and replace the filters to keep your vacuum's suction power optimal.
To prevent damage from cleaning chemicals rinse filters with cold water only. Allow all filters
to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into
electric parts.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
IMPORTANT:
DO NOT
use soap when cleaning the filters.
IMPORTANT:
Unplug the power cord before performing any maintenance.
HEPA
Filter
Foam
Felt
Filter
Door
NOTE:
To order replacement parts and filters, visit
sharkaccessories.com
.
Replacement
Pre-Motor Foam &
Felt Filter Kit
1239FT60
Replacement
HEPA Filter
1238FT60
Follow the previous instructions for removing filters. The
Pre-Motor Filter
should be replaced every
2.5 years. The
HEPA Filter
should be replaced every 3 years.
REPLACING FILTERS
