22
ENGLISH
sharkclean .com
21
1-800-798-7398
Your Shark ION ROBOT™ is designed with
Smart Sensor
technology so it can
clean all areas of your floors and navigate its way out of tight spaces. During your
first few cleanings, you may need to make some small adjustments to optimize
your robot’s performance.
RETURNING TO DOCK
Make sure the dock is set up as shown.
If your robot roams too far, it could have
trouble finding the dock. It may be helpful to
block off part of your home with the included
BotBoundary strips, or to add a second dock
(available at sharkaccessories.com)
DOORWAY THRESHOLDS
Your robot can easily climb over most common
thresholds. However in some situations they
may present a challenge. Use the included
BotBoundary strips to block off these areas.
LOW-CLEARANCE FURNITURE
Your robot may find its way under furniture
with low clearance, but not be able to free itself.
Use furniture risers to increase clearance, or
create a no-go zone with the included
BotBoundary strips.
CORDS AND OBSTRUCTIONS
Always prep your home before cleaning.
Some furniture or loose cords may create
problems for your robot. Clear away cords
and obstructions or block off the area with
the included BotBoundary™ strips.
Tip: You can use the included connectors to create angles with your
included BotBoundary strips.
Before Prep Robot Friendly
5 ft.
3 ft.
3 ft.
Use the BotBoundary strips to quickly and easily create “no-go zones” to keep
your robot out of the areas you would like it to avoid. These may include:
• Near power cords that might cause tangles
• Hallways where you’d rather your robot not travel
• Around furniture with low clearance that may trap your robot
BotBoundary strips
BotBoundary strips
USAGE INSTRUCTIONS
1. Cut the BotBoundary strip to the desired length, 18” Minimum,
so it covers the entire perimeter of an object or spans the length
of the doorway you’d rather your robot not cross.
2. Simply lay the BotBoundary strip
flat on the floor or under an
area rug. For best results, make sure your BotBoundary strip is
completely flat against the floor.
3. With the provided connectors, you can create angles to
customize the BotBoundary strips to fit your home.
When setting up your BotBoundary strips it is useful to either make a
closed loop around an object using the included connectors or to place
them between fixed objects, like door frames or legs of a couch.
(18” Minimum)
Boundary strip lays flat
PREPPING YOUR HOME USING BOTBOUNDARY
™
STRIPS
TIPS AND TRICKS FOR GREAT PERFORMANCE
