11
12
1-800-798-7398
sharkclean .com
ENGLISH
SETTING UP YOUR SHARK ION ROBOT™
USING YOUR SHARK ION ROBOT™
INSTALLING THE SIDE BRUSHES
1
Turn the unit over.
2
Align hole in center of side brush over brush post on
bottom of unit.
3
Press side brush down over the post until it snaps
into place.
DOWNLOADING THE SHARK APP
The app will guide you through easy
setup of your Shark ION ROBOT, and allow
you to schedule cleaning times and to
control the unit remotely.
The app will also provide access to:
• Tips, Tricks, and FAQs
• Tech Support
• Troubleshooting
NOTE:
Some carpets
may cause the robot to
malfunction due to pile
height.
IMPORTANT:
Before
cleaning an entire room
for the first time, we
recommend that you
first test your unit on a
small section of the floor
to ensure there is no
scratching.
IMPORTANT:
Shark ION
ROBOT uses cliff sensors
to avoid stairs and other
steep drops. Sensors may
work less effectively when
they are dirty. For best
results, clean sensors as
needed.
TIP:
Turn off the power
switch if Shark ION ROBOT
will not be used for a long
period of time.
TIP:
To preserve battery
life, unit should be
recharged at least once
every three months.
CLICK
CLICK
