sharkclean .com
sharkclean .com
CHECKING FOR BLOCKAGES
MAINTENANCE
Detach the handheld vacuum from the wand.
Remove the dust cup and check all intake openings
for debris or blockages.
Detach the wand, then tilt the floor nozzle
Debris
Intake
back and check openings for blockages.
Detach the wand and check it for blockages.
CHECK HANDHELD
CHECK WAND
CHECK FLOOR NOZZLE
Regularly rinse and replace the filters to maintain your vacuum's suction power.
To prevent damage from cleaning chemicals, rinse filters with cold water only. Do not use soap. Allow all filters to
air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts.
MAINTENANCE
CLEANING FILTERS
IMPORTANT:
Unplug the vacuum before performing any maintenance.
PRE-MOTOR FILTERS
Replacement Pre-Motor Filter Kit
XFFKHZ2000
Replacement Post-Motor Filter
XPMFHZ2000
REPLACEMENT FILTERS
With the dust cup detached, press the
Filter
Access
buttons on both sides of the back of the
dust cup, then pull out the filter housing. Pull the
foam filter out of the housing, then lift out the felt
filter by the pull tab.
The
Pre-Motor Filters
should be washed
once a month.
To access the post-motor filter, press the
Filter
Access
latch on the cover on the handheld vacuum.
Remove the cover and lift the out filter.
The
Post-Motor Filter
should be washed once
every 9 months.
POST-MOTOR FILTER
NOTE:
The pre-motor filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years.