sharkclean .com
sharkclean .com
ASSEMBLY
SETTINGS
NOTE:
Use the floor selector to toggle between Bare Floor and Carpet settings.
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use the Carpet setting.
NOTE:
Select Carpet for stuck-on dust and debris.
1
2
(Click)
(Click)
3
Carpet
Slide the switch to setting II to clean carpets.
The brushroll spins faster in this setting to
pick up debris on carpet surfaces.
CONTROLS
Power Button
Press the Power button to begin vacuuming.
Press again to turn off power.
Controls
The control panel is located on top of the
handheld vacuum.
POWER BUTTON
Bare Floor/Small Area Rugs
Slide the switch to setting I to clean bare floors
and small area rugs. The brushroll spins
slowly in this setting.
BARE FLOOR SETTING
CARPET SETTING
4.
For compact storage, hang the handheld
vacuum from the
Storage Hook
on the wand.
2.
Insert
Handheld Vacuum
into wand.
1.
Insert
Wand
into
Floor Nozzle
.
4
3.
Snap the
Onboard Storage Clip
onto the wand,
then place accessories on the holder. Ensure all
connections click securely into place.