background image

IMPORTANT SAFETY INSTRUCTIONS

ORDERING REPLACEMENT DUST CUP FILTERS

TO ORDER REPLACEMENT HEPA FILTERS

Item # XSH602

for Model EP602

When using your 

Transformer Vac

basic safety precautions should always be 

observed, including the following:

To reduce the risk of fire, electric shock, or 

injury:

Do not

leave the 

Transformer Vac

plugged 

in when unattended.  Unplug the electrical 

cord when not in use and before servicing.

Do not

allow  to be used as a toy.  Close 

attention is necessary when used by or near 

children, pets or plants.

Use only as described in this manual.  Use 

only manufacturer’s recommended 

accessories.

Do not

pull cord, use cord as a handle, 

close a door on cord, or pull cord around 

sharp edges or corners.  Keep cord away 

from heated surfaces.

Use 

only

extension cords UL-rated or cUL 

at 15 amperes. Extension cords rated for 

less amperage may overheat. Care should 

be taken to arrange the cord so that the cord 

cannot be pulled or tripped over.

Turn off all controls as applicable before 

unplugging from electrical outlet.

Do not

handle plug or vacuum with wet 

hands or operate without shoes.

Do not

put any objects into openings.  Do 

not use with any opening blocked. Keep free 

of dust, lint, hair and anything else that may 

reduce air flow.

Store your appliance indoors in a cool, dry 

area.

Keep your work area well lit.

Keep end of hose, wands and other 

openings away from your face and body.

Use only on dry surfaces.

Using improper voltage may result in 

damage to the motor and possible injury to 

the user. Correct voltage is listed on rating 

label.

1.

Read all instructions before using your 

Transformer Vac

.

2.

Use the system only for its intended use.

3.

To protect against a risk of electric shock, 

do not immerse any part of the system in 

water or other liquids.

4.

Never yank cord to disconnect from 

outlet; instead, grasp plug and pull to 

disconnect.

5.

Do not

allow cord to touch hot surfaces.  

6.

Do not

run appliance over cord.

7.

Do not

operate the system with a damaged 

cord or plug, or if the appliance or any other 

part of the system has been dropped or 

damaged.  To avoid the risk of electric 

shock, do not disassemble or attempt to 

repair the 

Transformer Vac

.  Return the 

system to 

EURO-PRO Operating LLC

(see 

warranty) for examination and repair.  

Incorrect re-assembly or repair can cause a 

risk of electrical shock or injury to persons 

when the 

Transformer Vac

is used.

8.

Close supervision is necessary for any 

appliance being used by or near children.  

Do not leave the system unattended while 

connected.

9.

Keep hair, loose clothing, fingers and all 

parts of body away from opening and 

moving parts.

10.

Do not

use to pick up flammable or 

combustible liquids such as gasoline or use 

in areas where they may be present. 

11.

Do not

pick up anything that is burning or 

smoking such as cigarettes, matches or hot 

ashes.

12. Use extra care when cleaning on stairs.

13.

Do not

use the vacuum without the 

HEPA filter in place.

14. This appliance is intended only for 

household use.  Follow all user instructions 

in this manual.

Call:

1-866-98SHARK (1-866-987-4275)

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

FOR TECHNICAL SUPPORT

for Model EP602

or

visit our website: www.sharkvac.com

Call:

1-800-798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

Please Note:

The HEPA Filter is washable.  It should, however, be replaced every six (6) 
months to ensure peak performance of your vacuum.
Both the Pre-Motor and Post Motor Filters are washable. They should 

however be replaced every three (3) months to ensure peak performance of 

your vacuum.

Important:

Make sure that 

ALL

filters have been completely air dried for 24 hours before 

re-installing back in the vacuum.

SAVE THESE INSTRUCTIONS

For Household Use Only

WARNING

To reduce the risk of electric shock, this appliance has a 

polarized plug (one blade is wider than the other).  This plug will 
fit in a polarized outlet only one way.  If the plug does not fit fully 
in the outlet, reverse the plug.  If it still does not fit, contact a 
qualified electrician to install the proper outlet.  Do not modify 
the plug in any way.

Rev. 08/03B

1

10

Отзывы: