15
AUS 02 8801 7666 NZ 0800 112 660
16
AUS sharkclean .com . au NZ sharkclean .co. nz
WARNING: To
prevent damage from
chemicals, rinse filters
with water only� Allow
all filters to air-dry
completely before
reinstalling�
CAUTION: Turn power
off and unplug before
servicing�
IMPORTANT:
Clean the
dust screen inside the
dust cup as required�
NOTE:
Empty dust cup
when debris reaches
the MAX fill line�
MAINTAINING YOUR VACUUM
EMPTYING THE DUST CUP
1
Press the Wand Release button at the top of the
wand to disconnect the handheld vacuum from
the wand�
OR
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons on both
sides of the base at the same time, then pull out
the dust cup�
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFFH380
Clean once a month�
Post-Motor Filter
XPSTFH380
Clean once a year�
Empty
CLEANING THE FILTERS
1
Access the Pre-Motor foam and felt
filters by lifting the latch on the top
of the handheld vacuum� Remove
and rinse the filters with water� Tap
loose dirt off filters between washes
as needed� Once completely dry,
insert the felt filter first, then place
the foam filter on top of it�
2
Access the Post-Motor filter under
the handle� Remove and rinse the
filter with water�
2
Hold dust cup over a trash bin and
press the Empty button on the front
of the dust cup� The bottom lid will
open, allowing the debris to fall out�
3
Once dust cup is empty, close the
bottom lid and insert dust cup back
into handheld vacuum until it clicks
into place�
Post-Motor filter
Pre-Motor filters
Foam
Felt
Empty
Dust Cup
Release
Clean Filter
