17
AUS 02 8801 7666 NZ 0800 112 660
18
AUS sharkclean .com . au NZ sharkclean .co. nz
MAINTAINING YOUR VACUUM - CONT�
1
Press down on the two
buttons on the floor
nozzle to pop up the
brushroll garage lid�
2
Lift the brushroll out by
the tab on the left side�
To remove any string,
hair or debris that may
be wrapped around
the brushroll, use the
onboard hair removal
tool� The tool is located
in a compartment on
the nozzle, above the
brushroll�
WARNING: Do not cut
anything but the hair,
fibres or string that is
wrapped around the
brushroll�
TIP:
Ensure the
brushroll garage is
completely sealed and
closed before using�
NOTE:
Heavy usage
over time may require
minimal upkeep in
order to maintain your
vacuum’s appearance�
STEP 1
STEP 2
3
To reinstall the brushroll,
return it to the brushroll
garage� Press down on
the brushroll garage lid
until it clicks into place�
MAINTAINING THE BRUSHROLL
MAINTAINING THE SOFT ROLLER
1
Slide the Soft Roller access button up
to remove the Soft Roller�
2
Use the onboard hair removal tool
to remove any string, carpet fibres
or hair that may be wrapped around
the Soft Roller� The tool is located in a
compartment on the nozzle, above the
brushroll� You can also tap loose debris
off the Soft Roller, or wipe it clean with
a dry towel� If you see any fibres or hair
buildup in the teeth behind the Soft
Roller, take a dry towel and wipe it away�
3
Wash the Soft Roller as needed� Use
only water, and let air-dry completely
for at least 24 hours�
4
Reinsert the Soft Roller by sliding it
into the front of the nozzle until it
clicks into place�
CHECKING FOR BLOCKAGES:
HANDHELD, WAND, AND FLOOR NOZZLE
1
Remove the wand from the handheld
portion and check all dust cup intake
openings�
2
Remove the floor nozzle from the wand
and check the wand for blockages�
3
Tilt neck of floor nozzle back to
straighten the airway� Remove
blockages�
