sharkclean .com
sharkclean .com
AVAILABLE ACCESSORIES
TROUBLESHOOTING
For all other issues, please call Customer Service 1-800-798-7398.
B
G
H
I
F
E
D
A
Crevice Tool
This slender tool offers extended reach to
access corners, baseboards, tight spaces,
and ceilings.
B
Duster Crevice Tool
Two cleaning tools in one. The crevice tool
gives you extended reach to clean in tight
spaces, while the soft brush is ideal for
dusting delicate surfaces.
C
Upholstery Tool
Picks up hair, dust, and large debris from
mattresses, couches, curtains, lampshades,
and other delicate upholstered fabrics.
D
Pet Multi-Tool
A single convertible tool for cleaning tough
pet messes two ways: use the stiff bristle
brush to clean stuck-on debris, or take off
the bristles to reveal an upholstery tool
perfect for removing stubborn pet hair and
large piles of debris.
E
Self-Cleaning Pet Power Brush
Tackles pet hair and ground-in dirt from
above-floor areas like carpeted stairs and
upholstery, while actively removing hair
wrap as it cleans.
F
Under-Appliance Wand
Clean under and behind hard-to-move
appliances and furniture with this adjustable
36” tool. Flip the extension piece over to
clean the underside of appliances.
G
Anti-Allergen Dust Brush
This brush features nylon fiber bristles
specifically designed for removing fine
dust and allergen particles from the most
delicate surfaces.
H
Home & Car Detail Kit
Deep-clean your car like a professional
detailer, or clean hard-to-reach areas in
your home. Micro-sized tools let you clean
around delicate objects and access the
tightest spaces like car vents and computer
keyboards.
I
Accessory Bag
This convenient accessory storage bag
measures 32 cm x 70 cm and fits the Under-
Appliance Wand. Smaller size available at
sharkaccessories.com.
A
C
NOTE:
Not all accessories come with all units. For a list of the accessories included with this model, see the top inside flap
of the box. To order additional accessories, visit
sharkaccessories.com
.
Power cord caught in brushroll or floor nozzle.
•
To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off power to the vacuum and remove the cord from the
brushroll or nozzle.
•
Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with
a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum
cleaner. Store your vacuum cleaner with the power cord secured around the two cord
hooks.
Vacuum is not picking up debris. No suction or light suction.
•
Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the
filters before reinstalling them.
•
Dust cup may be full; empty dust cup.
•
Check hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any
blockages found. See Checking for Blockages section for more information.
•
If any hair, string, or carpet fibers are wrapped around the brushroll, extend cleaning time
to allow the self-cleaning brushroll to remove them. If some hair or fibers remain wrapped
around brushroll after continued use, carefully remove them. See Cleaning the Brushroll
section for more information.
Vacuum lifts area rugs.
•
Make sure Surface Selector switch is set to Thick Carpet & Area Rug Cleaning.
•
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
Brushrolls do not spin.
•
If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum.
Remove pod and wand from floor nozzle and clear any blockages. Reconnect nozzle, plug in
vacuum, and turn on power.
•
With the power on, recline the handle, which will automatically turn on the brushrolls.
Vacuum turns off on its own or indicator light flashes red.
If your vacuum overheats, the thermostat will automatically turn off the motor. Perform the
following steps to restart:
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters. See Emptying the Dust Cup and Cleaning the Filters
section for more information.
3. Check for blockages in hose, wand, floor nozzle, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 60 minutes.
5. Plug in vacuum and turn it on.
