sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushrolls, turn on
power, then step on floor nozzle
and tilt handle back.
Press power button to turn on vacuum.
Please note the
Brushrolls
will not spin
unless the wand is reclined.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushrolls are spinning and working as they should.
Solid Red:
There is a jam in the brushroll area. Turn your vacuum off and remove any blockages in the nozzle.
Flashing Red:
The motorized floor nozzle is overheating. Turn off the vacuum, unplug it, and remove any
blockages. Let the vacuum cool down for at least 60 minutes before restarting. See Troubleshooting
section for more information.
Flashing Green:
The vacuum is operating in an environment that is either too hot or too cold. This vacuum
will only function properly in temperatures ranging from 32°F (0°C) to 104°F (40°C). Turn the vacuum off
and adjust the room temperature. Once the temperature has reached the operating range, turn the vacuum
back on.
Press the
Wand Release
button
to detach the wand from the pod.
Choose the appropriate setting.
Thick Carpet & Area Rug Cleaning
Set surface selector to Thick Carpet/Area Rug for
improved maneuverability on high pile carpet.
Carpet & Low Pile Cleaning
Set surface selector to Carpet/Low Pile to increase
the speed of the brushrolls and to help remove
stuck-on dust and debris.
Hard Floor Cleaning
Set surface selector to Hard Floor.
With pod removed, press the
Wand Release
button to detach
the wand from the floor nozzle.
Press the
Handle
button to detach
the handle from the wand.
With pod removed, press the
Handle
button to detach the
handle from the wand.
Press the
Lift-Away
button to
detach the pod from the floor nozzle.
UPRIGHT
POWER
ABOVE-FLOOR—HANDLE
LIFT-AWAY—HANDLE
POWERED LIFT-AWAY®
ABOVE-FLOOR—WAND
SURFACE SETTINGS
LIFT-AWAY—WAND
Wand
Release
Wand
Release
Handle
Handle
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt
in carpets) please set to Carpet/Low Pile. For particularly
stubborn stuck-on dust messes, set to Carpet/Low Pile mode.
NOTE:
Brushrolls spin in all modes.
INDICATOR LIGHT
