manualshive.com logo in svg

Shark 1.103-841.0, Руководство по обслуживанию, Страница: 5 / 32

Поделиться
Скачать
Shark 1.103-841.0 Скачать руководство пользователя страница 5

5

Safety

WARNING: This machine 
exceeds 85 dB. Appropriate ear 
protection must be worn.

AVERTISSEMENT: Cette 
machine excède 85 dB et une 
protection de l'ouïe appropriée 
doit être portée.

WARNING: Hot discharge fluid. 

Do not touch or direct discharge 
stream at persons or animals.

AVERTISSEMENT: Liquide de 
décharge chaud. Ne pas toucher 
ou décharger directement le jet 
vers des personnes ou des 
animaux, car cela risquerait de 
causer des blessures graves ou 
même la mort.

WARNING: This machine produces hot water and 
must have insulated components attached to 
protect the operator.

AVERTISSEMENT: Cette machine produit de l'eau 
chaude et doit comporter des composants isolés 
attachés pour protéger l'opérateur.

WARNING: Risk of injury. Hot 
surfaces can cause burns. Use 
only designated gripping areas 
of spray gun and wand. Do not 
place hands or feet on non-
insulated areas of the pressure 
washer.

AVERTISSEMENT: Risque de 
blessures. Les surfaces chaudes 
peuvent causer des brûlures. 

Utiliser uniquement les zones de prise désignées 
du pistolet pulvérisateur et de la lance. Utiliser 
uniquement les zones de prise désignées du 
pistolet pulvérisateur et de la lance.

11. To reduce the risk of injury, close supervision is 

necessary when a machine is used near children. 
Do not allow children to operate the pressure 
washer. 

This machine must be attended during 

operation. 

WARNING: Grip cleaning wand 
securely with both hands 
before starting. Failure to do 
this could result in injury from a 
whipping wand.

AVERTISSEMENT: Agripper la 
lance de nettoyage avec les 
deux mains avant de 
commencer. Le non-respect de 
cette consigne pourrait mener à 
des blessures causées par le 

mouvement violent de la lance.

12. Never make adjustments on machine while in 

operation.

13. Be certain all quick coupler fittings are secured 

before using pressure washer.

WARNING: High pressure 
developed by these machines 
will cause personal injury or 
equipment damage. Keep clear 
of nozzle. Use caution when 
operating. Do not direct 
discharge stream at people or 
animals, or severe injury or 
death will result. 

AVERTISSEMENT: La haute 

pression générée par ces machines causera des 
lésions corporelles ou des dommages à 
l'équipement. Ne pas décharger directement le jet 
vers des personnes ou des animaux, car cela 
risquerait de causer des blessures graves ou 
même la mort Se tenir à l'écart de la buse. Faire 
preuve de prudence lors de l'utilisation.

WARNING: Protect machine 
from freezing.

AVERTISSEMENT: Protéger la 
machine contre le gel.

14.To keep machine in best 
operating conditions, it is 
important you protect machine 
from freezing. Failure to protect 
machine from freezing could 
cause malfunction of the machine 

and result in death, serious bodily injury, and/or 
property damage. Follow storage instructions 
specified in this manual.

WARNING

EAR PROTECTION

MUST BE WORN

WARNING

HOT DISCHARGE FLUID:

DO NOT TOUCH OR

DIRECT DISCHARGE

STEAM AT PERSONS.

WARNING

RISK OF INJURY. 

HOT SURFACES 

CAN CAUSE BURNS

WARNING

TRIGGER GUN KICKS 

 BACK —  HOLD WITH 

        BOTH HANDS

WARNING

RISK OF INJECTION 

OR SEVERE INJURY

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

WARNING

PROCTECT FROM

FREEZING

Shark SMT Operator’s Manual  9.800-504.0 - E

Содержание 1.103-841.0

































Отзывы:

Нет отзывов