SHAREBOT Next Generation, Руководство пользователя

Страница: 60 / 66

60
2.3.3.4 ATTENTIONS TO FOLLOW WHILE USING THE MACHINE
During use of the machine it is necessary to follow the precautions described in this paragraph
- Operate the machine only if all devices for protection and safety are integrated.
- Do not remove, for any reason, devices and security guards installed.
- Follow all safety warnings and hazards affixed on the machine.
- Ensure that all reports of danger and safety affixed on the machine are always legible.
- Always check the absence of any other person near the machine before starting any processing or movement thereof.
- Wear all PPE required, regularly check the integrity (reporting immediately the dpi is no longer able to perform the specific task for which they were awarded).
- Not to intervene on the machine without having read carefully and thoroughly this manual.
- Use the machine at a location that has the features described in the paragraph concerning the Environmental Conditions of the installation, and, in particular,
verify that the installation location of the machine is equipped with adequate forced ventilation system (recommended 30 air changes per hour) and that this
system is turned on and functioning properly.
- Do not touch the nozzles of extrusion, the worktop and the material being deposited on the floor and just deposited during operation of the machine and during
the pre-heating phase; always wait until the sufficient time necessary for cooling of the above-mentioned parties.
- Report abnormal operating situations.
- Do not perform any action (including cleaning) at moving parts or hot surfaces.
- Do not attempt to rotate the machine incidents (please refer to the indications given in this manual).
- Do not attempt to stop or slow down the movement of moving parts with your hands, with other parts of the body, tools or objects of any kind; also avoid
physical contact with any moving of the machine body.
- Do not look directly into the LED light when turned on.
- Do not use the machine when you are under the influence of drugs or drink that may reduce alertness
2.3.4 Maintenance and Demolition
2.3.4.1 RISKS PRESENT IN MAINTENANCE AND DEMOLITION PHASES
During demolition and maintenance there are risks related to:
- operations on the machine by unqualified, untrained, uninformed, untrained or improperly fitted.
- contact with electrical parts under voltage
- impact and crushing by machine components moved or fixed or remounted incorrectly
- danger of crushing close upper limb moving bodies of engines controlling the movements along three axes, and close to the work surface in the event of sinking;
- danger of projecting components or parts of components, in the event of obstruction of extrusion nozzle;
- danger of inhaling fumes produced by hot extrusion process;
- danger of burns due to contact with extrusion nozzles, the work plan, the newly deposited material.
2.3.4.2 PERSONAL PROTECTIVE EQUIPMENT REQUIRED
2.3.4.3 SIGNS PRESENT
The machine is equipped with special reports of danger and prohibition;
2.3.4.4 ATTENTIONS TO FOLLOW DURING MAINTENANCE AND DEMOLITION
During demolition and maintenance it is necessary to follow the precautions described in this paragraph.
- Perform required operations using standard tools and necessary always wearing PPE
- The execution of maintenance and demolition operations must be carried out by qualified and specially trained.
- Respect the prescribed intervals for maintenance operations.
- Check that the power supply has been appropriately sectioned (plug removed) and that nobody can turn it back on before the end of the interventions required
(using appropriate signage).
- Do not attempt to stop or slow down the movement of moving parts with your hands, with other parts of the body, tools or objects of any kind; also avoid
physical contact with any moving of the machine body.
- Use auxiliary equipment and any other machinery or equipment (electric or pneumatic) only after you understand the instructions in its use and maintenance
manuals or after a specific training and formalized.
- Do not use, for no reason, petrol, solvents or inflammable fluids for cleaning of details, but use commercial cleaners and approved non-combustible and non-
toxic.
- Do not touch the nozzles of extrusion, the worktop and the material being deposited on the floor and just deposited during operation of the machine and during
the pre-heating phase; always wait until the sufficient time necessary for cooling of the above-mentioned parties.
- Do not tamper with the guards and protection devices of the machine.
- Before operating the machine, make sure that there are no people who are performing maintenance operations which have been restored and all safety de-