Shape ISEEI, Руководство пользователя

Страница: 14 / 20

14
BEFORE USING THE GIMBAL
1. Insert the two LP-E6 batteries by opening the front
battery tray and closing back the tray in its position.
2. Attach the camera or smartphone on its bracket with
the 1/4-20 screw (supplied with the unit).
3. Place the lens of the camera the closer to the C.O.G.
as you can with the height adjustment.
4. Adjust the camera on the roll axis by sliding it left or
right with the ¼-20 Allen key (supplied with the unit).
5. Balance the tilt axis by moving the camera bracket front
or back with the 10-32 Allen key (supplied with the unit).
6. After the camera is properly installed, lay the unit on a
flat surface. Make sure that the camera is straight and
balanced before turning on the unit.
7. Change the switch to the ON position.
8. You should see a red light appear once the unit is on.
9. Wait at least 6 seconds for the Gimbal to find its
horizon.
10. The joystick at the back of the unit will allow you to
control the stabilized tilt.
11. The ISEEI is now ready. Keep in mind the device’s
limits when operating (see page 7)
NOTE: The camera’s adjustments are directly proportional to
the device’s performance.
NOTE: When the unit becomes unresponsive, you may want
to swap the batteries or recharge them.