SHANY MZC-81XX SERIES Скачать руководство пользователя страница 3

Страница: 3 / 38

Installation / User’s Guide

I. Notes on Safety

◎

Please read the instructions thoroughly before installing or operating the unit.

◎

Please do not mount the machine on an unstable surface or bracket.

◎

Please prevent all liquids or other material from entering the dome housing.

◎

When connecting the power source, please follow all electric safety standards and

only use the power supply designated for this device. The speed dome’s RS-485

and video signal uses TVS technology to protect it from strong electrical surges.

This technology prevents damage to the device resulting from impulse signals

such as lightning strikes or surges of power. Allow for enough distance between

the RS-485 and video signals and high-voltage equipment or cables during the

transmission process. Please do not power the unit until all connections are

secure and installation is complete.

◎

Avoid shooting very bright objects directly into the camera’s CCD (such as the sun

or light fittings).

◎

When the machine is not operating properly, please refer to the instructions for

information about how to service or repair your speed dome.

◎

Please protect the unit against extremes of vibration, pressure or dampness while

transporting unit. Damage can occur from improperly packaging the unit while

shipping.

◎

The outdoor dome camera system is designed to be installed in outdoor

environments only.

Содержание MZC-81XX SERIES







































Результаты поиска

Содержание MZC-81XX SERIES

Отзывы:

Бренды по названию

Популярные бренды

SHANY MZC-81XX SERIES, Руководство пользователя

Результаты поиска

Содержание MZC-81XX SERIES

Отзывы:

Бренды по названию

Популярные бренды