SHANY MZC-81XX SERIES, Руководство пользователя

Страница: 26 / 38

Installation / User’s Guide
25
3. Speed Dome Camera Communication Protocol Setting
The 1st, 2nd and 3rd bits in SW202 are used to set communication protocol (see following
figure)
Note
◆
After establishing the communication protocol, please restart the unit to save the
changes.
◆
Please ensure that the control device and the camera are using the same protocol.
4. Speed Dome Camera Transmission Speed Setting (Baud Rate Setting)
The 4th and 5th bits of SW202 on the PCB board are used to set the baud rate (see
following figure).
The default baud rate setting is 2400, D, type, addr 1. Baud Rate Options: 1200BIT/S
、
2400BIT/S
、
4800BIT/s
、
9600BIT/s
Please refer to the controlling device and protocol for baud rate settings.
Note
◆ After set the speed, please restart the unit to save the changes.
Restore
Daisy chain