AFF/D 135
12-2-2015
-17-
Matt Asselman
12
MAINTENANCE
This machine needs little maintenance
.
Remove loose dirt once in a while
.
SAFETY PRECAUTIONS
1.
Switch of the regulating unit (Switch
H
).
2.
Clear the working surface.
3.
Disengage the air connection.
4.
Remove the plug from the socket.
LUBRICATION POINTS
The following points should be lubricated with a drop of oil or grease once a year:
1.
Bearing cilinder: underside.
2.
The lubrication point can be accessed from the rear of the machine.
3.
Bearing cilinder: upperside.
4.
The lubrication point can be reached by removing the solid core strips on the middle of the
machine.
PROFILES
The heating element works more effectively when it is clean. Remove dirt and deposits from the
heating elements regularly. Blow away loose dirt and brush them clean.
WATER SEPARATOR
Check if there is water in the water separator and remove it if necessary. The water separator is
situated on the backside of the air/timer unit. If there is water in the glass holder, it should be
drained off.
1.
Disengage the air connection.
2.
The top frame will lower slowly.
3.
Hold a container under the nipple and slowly open the nipple. All the water will then run out of
the glass holder.
4.
Close the drain nipple by hand.
5.
Switch the machine on again as described in Section
10.
