Shad UC02, Инструкция по эксплуатации, Страница: 25 / 26

Carefully read the manufacturer’s Shad product instruction manual and follow its recommendations. Do not make changes or
modifications to prevent affecting the normal operation of the device andoverriding the operations for which they were created.
This device has been tested and meets all the requirements needed to provide reasonable protection against harmful interference in a
residential facility. This device generates, uses and can radiate radiofrequency energy and, if it is not installed or used acc ording to the
instructions, it can cause radio communication interferences. However, there is no guarantee that interferences will not occur in a specific
facility. If this device causes harmful interferences to radio or television reception, it can be checked by turning it on and off. It is
recommended that the user trying to correct the interference do so by using one of the following measures:
• Move the receiving antenna to a new direction or position.
• Increase the distance between the device and the receptor.
• Connect the device to a socket on a different circuit than that of the receptor.
• If the problem persists, contact your distributor or a radio/TV technician for help.
Copyright
7
The Shad HANDSFREE device uses components with the latest technology and is manufactured to high standards.
To keep your device from inadvertently becoming damaged, please read the following recommendations carefully:
• Do not attempt to open any of the system components, since the electronic parts inside it may become damaged. Do not attempt to
open or change the battery as it may be dangerous.
• Keep the Shad HANDSFREE out of the reach of children.
• Keep the Shad HANDSFREE in a dry place. Humidity and condensation may damage the electronic circuits.
• Avoid exposing the device to extreme temperatures. Intense cold may create condensation inside the components as these warm up.
Extreme heat may damage the battery, circuits or casings.
• Do not drop, hit or bend the components as the internal circuits may become damaged.
• Do not paint or decorate the Shad HANDSFREE as the casings may become damaged or impede correct operation.
• Do not use chemical products, solvents or detergents to clean the Shad HANDSFREE as these may damage the device.
Devices, marketed under the Shad brand, have been manufactured according to the requierements stipulated by the appllicabcce
regulation at the national, European and international level, and meet the quality and safety standars that all electronic audio devices
must have.
MATGroup
™
is the sole owner of the content rights of this instruction manual. All intellectual property rights are reserved.
Shad brand and technologies are registered and patented by MATGroup
™.
WARNING: User information
Manufacturer’s Declaration MATGroup™
Care and maintenance