Shad UC02, Инструкция по эксплуатации, Страница: 24 / 26

Intercom Pairing
Intercom Functions Intercom Functions
Dual Link: Pairing as an Intercom while maintaining hands-free funtion.
. Complete pairing with the phone as described in the paragraph above “pairing to a mobile phone or GPS navigator” .
. Switch off Bluetooth® on both phones.
. Make sure both Shad devices are switched off.
Single Link: Pairing as intercom only (without hands-free features):
. Make sure both Shad devices are switches off .
. Press and hold the control buttons (1b) of both Shad devices until the LED indicators of both devices begin flashing in Red and Blue.
.
Briefly press the control button of the Shad UC03 device. After a fw seconds, both devices will pair and intercom funcions will be activated.
UC03
UC02/ UC03/ BC01
BC02/ BC03/ BC22
. Press and hold the control buttons (1b) on both Shad devices until the LED indicators of both devices begin flashing in Red and Blue.
. Briefly press the control button ot the Shad UC03 device. After a few seconds, both devices will pair and intercom funcions will be activated.
. Activate Bluetooth® on the phones again. Depending on your phone model, it will automatically detect the device paired. Otherwise, you will need to select
it manually.
Shad UC03
Activating and deactivating intercom functions between two Shad devices: once both Shad devices have been paired and
switched on, press the UC03 control button (1b) for two seconds to activate or deactivate intercom functionality.
Adjusting the volume for intercom functions: you can adjust the volume by briefly pressing the control button (1b) of the UC03.
It will then cycle throught three levels: LOW < MEDIUM < HIGH < LOW...
6
UC03
UC03
Shad UC03
6
UC02/ UC03/ BC01
BC02/ BC03/ BC22
UC02/ UC03/ BC01
BC02/ BC03/ BC22