SAFETY DETAILS
☞
The device should not be immersed in water and should not
be cleaned up with pressure water.
☞
If the cable is damaged is should be replaced by authorized
service personnel with the special cable group supplied by the
manufacturer or service dealer .
☞
If this device located near to any wall, separation, kitchen
furniture, decorative coating etc., then these should be made
of fireproof material, otherwise should be coated with such
material and it is strongly recommended that fire safety
protection instructions are observed.
☞
The device should not be handled by anyone else except for the
manufacturer or authorized service.
6/12
☞
The device should not be exposed to direct air flow.
+5 °C / +40 °C
☞
Supply voltage of the device is 220-240V 50 Hz. Do not use
different voltage.
☞
Power supply connection should be made using a 30 mA
current leakage fuse as a protection against current leakage
danger.
☞
To switch the device of from the supply circuit, supply
installation should be equipped with a circuit breaker (fuse, switch
etc.) having 3 mm of contact space between each pole.
☞
This device should be installed in line with effective regulations
and only be operated in well ventilated places.
☞
The device should not be installed near fryers, grills or similar equipment radiating heat.
☞
Nothing should put on the device.
