PAGE 17
PAGE 16
3. FOR SAFE OPERATION - MAINTENANCE
In order to maintain your product in proper
working order, perform the maintenance
and checking operations described in the
manual at regular intervals.
Always be sure to turn off the engine and
disconnect the spark plug wire before
performing any maintenance, checking
procedures or working on the machine.
The metallic parts reach high
temperatures immediately after stopping
the engine.
In the event that any part must be
replaced or any maintenance or repair
work not described in this manual must
be performed, please contact SGS for
assistance.
Under no circumstances should you ever
take apart the product or alter it in any
way. Doing so might result in the product
becoming damaged during operation or
the product becoming unable to operate
properly.
WARNING
3. FOR SAFE OPERATION - HANDLING FUEL
The engine of the product is designed to
run on mixed fuel which contains highly
flammable petrol. Never store cans of fuel
or refill the tank of the unit in any place
where there is a boiler, stove, wood fire,
welding sparks, electrical sparks or any
other source of heat or fire which might
ignite the fuel.
Never smoke while operating the unit or
refilling its fuel tank.
When refilling the tank, always turn off the
engine and allow it to cool down. Take a
careful look around to make sure that there
are no sparks or open flames anywhere
nearby before refueling.
Wipe away spilled fuel completely using
a dry rag if any fuel spillage occurs during
refueling.
After refueling, screw the fuel cap back
tightly onto the fuel tank and then carry
the unit to a spot 3m or more away from
where it was refueled before turning on the
engine.
Do not inhale fuel fumes as they are toxic.
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850