PAGE 15
PAGE 14
3. FOR SAFE OPERATION - USING THE TRIMMER
5. Never touch the exhaust, spark plug or
other metallic parts of the engine while
the engine is in use or immediately after
turning the engine off. Doing so may cause
burns or electrical shocks.
6. While operating the machine be always
sure of a safe and secure operating
position especially when using steps or a
ladder.
7. Check the cutting attachment. Never use
blades that are dull, cracked or damaged.
8. To reduce the fire hazard, clean
dirt, leaves and surplus lubricant,
etc from the muffler and engine.
IF SOMEONE APPROACHES
1. Guard against hazardous situations
at all times. Warn adults to keep pets and
children away from the area. Be careful if
you are approached. Injury may result from
flying debris.
2. If someone calls out or otherwise
interrupts you while working, always be
sure to turn off the engine before turning
around.
3. FOR SAFE OPERATION - USING THE TRIMMER
Cut only materials recommended by
the manufacturer. And use only for tasks
explained in the manual.
1. Grip the handles firmly with both hands
using your whole hand. Place your feet
slightly apart (slightly further apart than
the width of your shoulders) so that your
weight is distributed evenly across both
legs, and always be sure to maintain a
steady, even posture while working.
2. Maintain the speed of the engine at the
level required to perform cutting work, and
never raise the speed of the engine above
the necessary level.
3. If the unit starts to shake or vibrate, turn
off the engine and check the whole unit.
Do not use it until the trouble has been
properly corrected.
4. Keep all parts of your body away
from moving cutting attachment
and hot surfaces.
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850